Gemini Tapered Edge Strip (TES) is produced with a closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt or inorganic coated-glass facers. Dimensionally stable Gemini TES provides a Zero Edge™ polyiso tapered insulation transition. Gemini ™ Tapered Edge Strip (TES) is produced with a tapered closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt or inorganic coated-glass facers. The dimensionally stable Gemini ™ TES provides a Zero Edge ™ polyiso tapered insulation transition of either 1.0” per ft or 1.5” per ft.
Properly designed and installed, EnergyGuard™ Tapered Polyiso Insulation Systems virtually eliminate ponding water High thermal efficiency Easily installed with mechanical fasteners, hot asphalt, or loose-laid in a ballasted system; Low point and letter codes are designated on each board. Gemini™ TES Tapered Edge Strip achieves timely water evacuation, extending the life of the roof membrane. Each strip is made with a closed cell polyiso foam core integrally laminated to reinforced, dimensionally stable facers and available in a standard thickness .
EnergyGuard™ Perlite Tapered Edge Strip Description. Factory fabricated from EnergyGuard™ rigid perlite insulation board. Cut on angles that slope from zero on one edge to 1/2" to 2" on the opposite edge. Designed for smooth transition from lower to higher elevations. Easy to fabricate for installation with most types of roof systems. CANT STRIP TAPERED EDGE STRIP. SPECIFICATIONS. Conforms to ASTM C 208, Type II – Roof insulation board; TECHNICAL DATA APPLICATION. CANT STRIP Install for a sloping transition of horizontal to vertical surfaces. TAPERED EDGE Elevate and slope roof for positive drainage. TAPERED EDGE can be installed on wood, metal, or concrete decks.